固定资产净残值（Scrap value）配置？

cici-tang · 发表于 2013-1-8 17:38

迟到的‘不客气’，

beck0224 · 发表于 2013-1-10 23:01

cici-tang 发表于 2009-10-22 12:19
1.ANHAL维护截止码(cutoff vaule key )比如Z01，维护cutoff percentage为10%；
2.AFAMA维护折旧码(Depreci ...

写的清楚，顶一个。

muy_it168 · 发表于 2014-5-28 19:26

楼主如果不要用10%的残值率，就要设净残值的话。
ao21修改相应Layout，把它们都变成opt的就能直接输入了，并且优先级最高，再也不用管什么戒指马了。

：D

albinhuang · 发表于 2014-9-23 10:30

请教下,不使用截止码,想直接指定固定资产残值为1元.系统在哪里可以配置?谢谢!

albinhuang · 发表于 2014-9-23 10:41

是不是在AS02中维护了资产的残值,就能够起效.不会参考截止码?
You can specify an absolute amount here which cannot be depreciated in this depreciation area (memo value). If you specify a value here, then the cut-off value percentage determined on the basis of the cut-off value key in the depreciation key will not be taken into account. Even if no cut-off key is defined, depreciation will stop when this value is reached.

Depending on how the cut-off value key is defined, this amount is either deducted from the depreciation base value before the start of depreciation, or depreciation is stopped as soon as this amount is reached.