Standby Switchover_status Showing Not Allowed

tolywang

Yong Huang 发表于 2017-5-22 22:25
If the parameter value is 'RESET', why not alter system set it to enable? See
https://community.ora ...

是的， 手工设置 log_archive_dest_state_2 = enable 之后， 主备及broker显示都恢复正常， 但是只是

”Standby Switchover_status Showing Not Allowed “  这个问题还是没有得到解决。

Yong Huang

> ”Standby Switchover_status Showing Not Allowed “  这个问题还是没有得到解决。

Ignore that. That is NOT a problem. That's by design. To me, it serves as a reminder that I have to start the switchover from the primary. Once the primary is switched, the standby switchover_status value will change and I'll work on the standby. Then the whole process of switchover is completed.

tolywang

Yong Huang 发表于 2017-5-24 00:50
> ”Standby Switchover_status Showing Not Allowed “  这个问题还是没有得到解决。

Ignore that. Th ...

OK,  Thanks.