[求救]SD billing VPRS is missing 问题

xinre310 · 发表于 2008-7-24 08:02

我已经在SPRO 里面找到了VPRS 的维护项,可以更改成允许手工维护,我不晓得这样改,会不会对系统造成影响///

ronaldinho17 · 发表于 2008-7-24 08:16

原帖由 xinre310 于 2008-7-24 08:02 发表
我已经在SPRO 里面找到了VPRS 的维护项,可以更改成允许手工维护,我不晓得这样改,会不会对系统造成影响///

应该不能吧，我以前使过

xinre310 · 发表于 2008-7-24 08:28

=.=~~!!!

xinre310 · 发表于 2008-7-25 16:05

重新开了SO ,,DN billing....问题解决了

itpub_rd · 发表于 2008-7-25 17:18

穷追不舍是我们的作风!

gqlny · 发表于 2008-7-28 17:23

VPRS not showing in billing can be due to a few of the following reasons:

1. Authorization control. --> check with your authorization guys.

2. VPRS in your pricing procedure is not properly maintained. --> validate your config against setting in procedure RVAA01 and make sure all columns have the same value esp in requirements.

3. If this is a delivery-related billing, validate the material document to see if there is a financial document. If there isn't any, it means the particular movement done is not valuated. Validate with your MM/FI consultant.

4. If this is an order related billing, but not a 3rd party sales order, the VPRS should be copied blindly from the sales order. Validate your sales order to see if you have VPRS in there.

rosefish · 发表于 2008-7-29 10:14

dylanchi · 发表于 2013-8-26 17:53

gqlny 发表于 2008-7-28 17:23
VPRS not showing in billing can be due to a few of the following reasons:

1. Authorization contr ...

请问如果是3rd Party的话，成本价从何而来？我在配置中哪边可以看到VPRS成本价抓取数据源的配置？另外系统如何区分是否是3rd Party？schedule line里面吗？

感谢

[求救]SD billing VPRS is missing 问题

回复 #26 gqlny 的帖子