12
返回列表 发新帖
楼主: andy_lau

Cisco 全线网络设备的口令恢复

[复制链接]
论坛徽章:
3
11#
 楼主| 发表于 2006-7-30 21:03 | 只看该作者
msfc-switch#


1.        cisco cache egine 2050
Password Recovery Procedure
for the Cisco Cache Engine 2050
Description
This document describes the administration password recovery procedure for the Cisco Cache Engine 2050.
Note: Your configuration is lost after performing this password recovery. It is not possible to keep your configuration when recovering a lost administrative password.
Step-by-Step Procedure
1.        Establish a console connection to the Cisco Cache Engine and reload the device or type reboot at the command line. While the Cache Engine is rebooting, press any key to interrupt the low level configuration countdown.
2.        Enter the basic configuration menu. Use:
•        a dash (-) to go to the previous field
•        the Enter key to go to the next field
3.        Press Enter five times until the "Replace admin pw" field is displayed.
4.        Enter the new administrative password and press Enter. The next field is "Repeat admin pw".
5.        Enter the same password once again and press Enter.
6.        At the prompt: "Is this basic configuration acceptable?", type "y" for yes.

使用道具 举报

回复
论坛徽章:
3
12#
 楼主| 发表于 2006-7-30 21:03 | 只看该作者
Example of Password Recovery on a Cisco Cache Engine 2050
The following example shows password recovery on a Cisco Cache Engine 2050:
!-- The Cache Engine has just been rebooted --!


Cisco Cache Engine hard disk bootstrap
Version: 1.0
Copyright (c) 1997 Cisco Systems, Inc.
Creation date: Sep 10 1997, 16:51:59



Loading system image...1209816 + 40080 + 74600836
nTarget Name: vxTarget
User: target
Attaching network interface lo0... done.
NFS client support not included.
Loading symbol table from /ata0/vxWorks.sym ...done

System restarted at
GMT: FRI JUL 07 17:37:44 2000

Basic configuration file is complete
h
Press any key to OVERRIDE basic low-level configuration...
!--- From the moment this line appears, you have 10 seconds to press any key
5
override selected...


Use '-' to step back,
to accept a non-blank value as given.
You must accept or provide values for all configuration prompts.

      Config Version [                     1]:
          IP Address [          172.17.241.7]:
          IP Netmask [         255.255.255.0]:
     Default Gateway [          172.17.241.1]:
    Wccp Home Router [         172.17.241.32]:

使用道具 举报

回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

TOP技术积分榜 社区积分榜 徽章 团队 统计 知识索引树 积分竞拍 文本模式 帮助
  ITPUB首页 | ITPUB论坛 | 数据库技术 | 企业信息化 | 开发技术 | 微软技术 | 软件工程与项目管理 | IBM技术园地 | 行业纵向讨论 | IT招聘 | IT文档
  ChinaUnix | ChinaUnix博客 | ChinaUnix论坛
CopyRight 1999-2011 itpub.net All Right Reserved. 北京盛拓优讯信息技术有限公司版权所有 联系我们 未成年人举报专区 
京ICP备16024965号-8  北京市公安局海淀分局网监中心备案编号:11010802021510 广播电视节目制作经营许可证:编号(京)字第1149号
  
快速回复 返回顶部 返回列表