|
[ID 802195.1]
MD5 Checksums for R12.1.1 Rapid Install Media [ID 802195.1]
--------------------------------------------------------------------------------
修改时间 10-NOV-2011 类型 WHITE PAPER 状态 PUBLISHED
View Change log
Oracle EBusiness Suite R12.1.x Rapid Install
md5 Checksums
November 2011
--------------------------------------------------------------------------------
Section 1: Overview
Section 2: Download md5 checksum results from Oracle
Section 3: Compare md5 checksums
Section 4: Disk overview, to be used when corrupted files are found
--------------------------------------------------------------------------------
Section 1: Overview
After staging the Rapid Install software with the adautostg.pl script or downloading the Rapid Install software from Oracle Electronic Delivery, the md5 checksums for the staged directory structure can be used to validate the software integrity. Do this by running the md5sum program against the stage area using the oracle created checksum file. This is not an official development document - this procedure was performed/tested using the downloadable Rapidwiz media.
--------------------------------------------------------------------------------
Section 2: Download md5 checksum results from Oracle
Download the md5 checksum results from Oracle as posted below into a local file, for example <your platform> md5sum_.txt.
The attached files contain the md5 checksum results for every R12.1.1 release. Download the file corresponding to the used release and platform. The md5 checksum has been created without the startCD as it is often being updated, the checksum for the startCD's can be tested separately.
Release 12.1.1 Checksums currently available:
R12.1.1 - Windows
R12.1.1 - IBM AIX
R12.1.2 - Linux on IBM System z
R12.1.1 - Linux 32-bit
R12.1.1 - Linux 64-bit
R12.1.1 - Solaris Sparc 64-Bit
R12.1.1 - HP_UX
R12.1.1 - HP_UX Itanium
Release 12.1.x StartCD Checksums:
R12.1.1 startCD - Version 12.1.1.9
R12.1.1 startCD - Version 12.1.1.10
R12.1.1 startCD - Version 12.1.1.11
R12.1.2 startCD (Linux on IBM System z only) - Version 12.1.1.12.ZLINUX
R12.1.1 startCD - Version 12.1.1.13
--------------------------------------------------------------------------------
Section 3: Compare md5 checksums
Compare the Stage with the md5sums downloaded from Oracle (md5sum_.txt). There should not be any FAILED entry in the output. If a FAILED entrie was found, then the stage area was not created successfully. The stage have to be re-created for every component indicating differences (FAILED).
Note: The following example assumes the stage exists in /u01 for Unix and Linux, or F:\ for Windows customers.
Execute the following example commands to check stage using the the md5 checksums
On Unix/Linux:
Install the md5sum utility for your platform if md5sum is not present on your system. If md5sum is not available from your OS Vendor for your OS version (for example HP 11.0), download and install the coreutils package from gnu.org .
$ cd /u01/StageR12
$ md5sum --check md5sum_Linux32.txt > md5sum_result.txt
On Windows:
MKS Toolkit or cygwin needs to be installed to be able to use mdm5sum.
F:\> cd StageR12
F:\StageR12> md5sum --check md5sum_Windows.txt > md5sum_result.txt
Note: The md5 checksum will validate the entire stage area and may take 10 minutes or more depending on hardware resources and system load.
When the md5sum command failed for all lines with error: ": FAILED open or read" try to make it a unix file using: dos2unix <checksum file> <checksum file>
Section 4: Disk overview, to be used when corrupted files are found
When a corrupted file is found the following can be used to identify which part needs to be re-downloaded from edelivery.
Release 12.1.1 Disk overview:
R12.1.1 - Windows
R12.1.1 - IBM AIX
R12.1.2 - Linux on IBM System z
R12.1.1 - Linux 32-bit
R12.1.1 - Linux 64-bit
R12.1.1 - Solaris Sparc 64-Bit
R12.1.1 - HP_UX
R12.1.1 - HP_UX Itanium
Change Log
Date Description
13 May 2009
Initial Post
26 June 2009
Added Section 4: Disk overview
29 June 2009
Added Disk overview Linux 64
17 Juli 2009
Added HP_UX and HP_UX Itanium
21 Augustus 2009
Added StartCD version 12.1.1.10, re-uploaded all files in unix format
13 October 2010
Added StartCD version 12.1.1.11
20 October 2010
Added R12.1.2 - Linux on IBM System z and StartCD
10 November 2011
Added startCD version 12.1.1.13
Note 802195.1 by Oracle Support
Copyright ? 2003 Oracle Corporation
Last updated: 10 November 2011
附件
--------------------------------------------------------------------------------
AIX64_part_overview.txt (701.48 KB)
HP_UX_Itanium_part_overview.txt (97.58 KB)
HP_UX_part_overview.txt (93.18 KB)
IBMLinux_System_z part overview (133.53 KB)
Linux32_part_overview.txt (694.22 KB)
Linux64_part_overview.txt (693.7 KB)
Solaris64_part_overview.txt (691.87 KB)
Windows_part_overview.txt (680.78 KB)
HP_UX (141.63 KB)
md5sum_HP_UX_Itanium.txt (146.12 KB)
IBMLinux_System_z (133.53 KB)
IBM AIX (147.76 KB)
Linux 32 (132.28 KB)
Linux 64 bit (131.23 KB)
Solaris 64 (131.97 KB)
Windows md5 (125.14 KB)
IBMLinux_System_zstartCD (757.13 KB)
startCD 12.1.1.10 (516.33 KB)
startCD Base (696.68 KB)
startCD 12.1.1.11 (562.37 KB)
md5sum_startCD_12.1.1.13.txt (640.86 KB)
相关内容
--------------------------------------------------------------------------------
产品
--------------------------------------------------------------------------------
Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Applications Manager
关键字
--------------------------------------------------------------------------------
ADAUTOSTG.PL; AIX; AREA; EDELIVERY; INSTALL; ITANIUM; MD5; RAPID INSTALL; RAPIDWIZ; SOLARIS; STAGING AREA; WINDOWS
|
|